HP QLogic QMH4062 Network Adapter

*** ITEM IS NON-RETURNABLE ***

The QMH4062 represents the most advanced iSCSI initiator technology available for blades. This dual port, IPv6 compliant Gigabit Ethernet iSCSI initiator mezzanine is optimized for high performance iSCSI traffic from an HP BladeSystem c-Class ProLiant server within either a Microsoft or Linux environment. It is an alternative to less integrated Ethernet iSCSI offerings. It is supported on all ProLiant c-Class servers, all mezzanine slots; multiple adapters per sever. Designed for ultimate performance, the QMH4062 provides offloading of iSCSI and TCP/IP traffic for both Microsoft Windows 2003 and Linux. The QMH4062 supports Vmware allowing users the flexibility of ESX 3.5 and ESXi 3.5 host booting from an iSCSI SAN. The QMH4062 is IPv6 compliant card and can provide a c-Class end-to-end IPv6 solution when using either the Cisco Catalyst Blade Switch 3120 with IPv6 upgrade option or the Ethernet Pass-Thru.

Product Description QLogic QMH4062 - network adapter - 2 ports Device Type Network adapter Form Factor Internal Interface (Bus) Type PCI Express x4 Ports Qty 2 ports Cabling Type Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Data Transfer Rate 1 Gbps Network / Transport Protocol TCP/IP, iSCSI Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP) System Requirements SuSE Linux Enterprise Server, Microsoft Windows Server 2003, Red Hat Enterprise Linux, Microsoft Windows Server 2003 x64 Edition, Microsoft Windows Server 2008, VMware ESX Server 3.5, VMware ESXi 3.5 General Device Type Network adapter - 2 ports Form Factor Internal Interface (Bus) Type PCI Express x4 Networking Connectivity Technology Wired Cabling Type Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Data Transfer Rate 1 Gbps Network / Transport Protocol TCP/IP, iSCSI Features Flow control, VLAN support, IPv6 support, TCP/IP offloading, Quality of Service (QoS), Jumbo Frames support Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP) Expansion / Connectivity Interfaces 2 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 Miscellaneous Compliant Standards CE, FCC Class A certified, UL, VCCI, EN 60950, EN55022, ICES-003, EN55024, EMC, AS/NZS 3548, FCC CFR47 Part 15, RoHS, ACA Software / System Requirements OS Required SuSE Linux Enterprise Server, Microsoft Windows Server 2003, Red Hat Enterprise Linux, Microsoft Windows Server 2003 x64 Edition, Microsoft Windows Server 2008, VMware ESX Server 3.5, VMware ESXi 3.5 Environmental Parameters Min Operating Temperature 50 °F Max Operating Temperature 95 °F Humidity Range Operating 10 - 90%