Cisco 7606 Router

FREE GROUND SHIPPING - LIMITED TIME ONLY

The Cisco 7606 Router is a compact, high-performance router designed for deployment at the network edge and in the data center, where performance and services are necessary to meet the requirements of both enterprises and service providers. The Cisco 7606 delivers both, providing a forwarding rate of 30 Mpps centrally and up to 240Mpps distributed with 480-Gbps total throughput while delivering high-touch, hardware-accelerated IP services. One of the Cisco 7600 Series Routers, the Cisco 7606 delivers optical LAN, WAN, and metropolitan-area network (MAN) networking at the network edge and in the IDC. The Cisco 7606 enables service providers to offer high-value, differentiated services, and enterprises to deploy the advanced network infrastructure necessary to succeed in high-traffic environments. Providing performance and reliability, the Cisco 7606 offers 240 Mpps in distributed forwarding, with options for redundant route processors and power supplies. The inclusion of two Gigabit Ethernet ports on the Cisco Supervisor 720 with the multilayer switch feature card 3 (MSFC-3) route processor used in the Cisco 7606 eliminates the need to use a line-card slot for uplink ports. The result of this design is more efficient use of available line-card slots and increased deployment flexibility.

Product Description Cisco 7606 - router - with Cisco Supervisor Engine 32 with 8 ports Gigabit Ethernet, PFC3B, and MSFC2A Device Type Router Form Factor Rack-mountable - modular - 7U Dimensions (WxDxH) 17.4 in x 21.8 in x 12.2 in Routing Protocol PIM-SM, PIM-DM, IGMPv3, GRE, PIM-SSM, Multiprotocol BGP Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3 Features Flow control, layer 4 switching, layer 3 switching, layer 2 switching, DHCP support, NAT support, ARP support, MPLS support, DoS attack prevention, IPv6 support Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Bundled with Cisco Supervisor Engine 32 with 8 ports Gigabit Ethernet, PFC3B, and MSFC2A General Device Type Router Form Factor Rack-mountable - modular - 7U Installed Modules Qty (Max) 1 (installed) / 6 (max) Width 17.4 in Depth 21.8 in Height 12.2 in Bundled with Cisco Supervisor Engine 32 with 8 ports Gigabit Ethernet, PFC3B, and MSFC2A Networking Connectivity Technology Wired Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Routing Protocol PIM-SM, PIM-DM, IGMPv3, GRE, PIM-SSM, Multiprotocol BGP Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3 Status Indicators Port status, power, link OK, system, active Features Flow control, layer 4 switching, layer 3 switching, layer 2 switching, DHCP support, NAT support, ARP support, MPLS support, DoS attack prevention, IPv6 support Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Expansion / Connectivity Expansion Slots Total (Free) 6 ( 5 ) x expansion slot 8 ( 8 ) x SFP (mini-GBIC) 1 CompactFlash Card - type II Interfaces 1 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 2 x Hi-Speed USB - 4 pin USB Type A 1 x management - console - RJ-45 Miscellaneous Rack Mounting Kit Included Compliant Standards NEBS level 3, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, AS/NZ 3548 Class A, FCC Part 15, CSA C22.2 No. 60950-00, ICES-003 Class A Power Power Device Power supply - hot-plug / redundant - plug-in module Installed Qty / Max Supported Qty 2 (max) Environmental Parameters Min Operating Temperature 32 °F Max Operating Temperature 104 °F Humidity Range Operating 10 - 85%